Modules


The following Modules have different levels of difficulty which will be represented by the number of (*) following the Module number. Levels of difficulty range from * to ***, where * is simple, ** is moderate and *** is challenging (if available).

Not sure which Modules are right for you. Check out Get Started for tips.


Module 1

Goal: Introduce students to the basics of circuits.

Module 1*: LEDs & Breadboard

Module 1*: LEDs & Breadboard Part 4 answer
Kit(s) needed: Kit 1: LEDs & Breadboard
Time: 35-40 minutes
Test LED with Battery: 5 minutes
Using the Breadboard: 10 minutes
Lighting Multiple LEDs: 10 minutes
Your turn: 10 minutes


Module 1**: LEDs & Breadboard

Module 1**: LEDs & Breadboard Part 4 answer
Kit(s) needed: Kit 1: LEDs & Breadboard
Time: 35-40 minutes
Test LED with Battery: 5 minutes
Using the Breadboard: 10 minutes
Lighting Multiple LEDs: 10 minutes
Your turn: 10 minutes


Module 2

Goal: Introduces the basics of creating circuits with soft conductive materials

Module 2: Soft Circuit

Kit(s) needed: Kit 2: Soft Circuit
Time: 30-40 minutes
Placing the LEDs: 8 minutes
Caution: 3 minutes
Connecting LEDs Positive: 10 minutes
Connecting LEDs Negative: 10 minutes
Add Battery: 4 minutes


Module 3

Goal: Understand the basics of Arduino and pseudocode

Module 3a: Intro to Arduino

Kit(s) needed: Kit 1: LEDs & Breadboard; Kit 3: Arduino
Time: 30-40 minutes
 What is an Arduino: 5 minutes
What is on an Arduino: 4 minutes
Set up: 5 minutes
Upload sample code: 2 minutes
Use an external LED: 3 minutes
Edit code!: 10 minutes
Use another pin for an LED: 3 minutes
Photocell: 10 minutes
Use the Serial Monitor to read input measurements: 2 minutes
Output setup: 1 minutes


Module 3b: Basics in Pseudocode

Kit(s) needed:
Time: 30-40 minutes
What is Programming: 5 minutes
Pseudocode: 20 minutes
Breakdown: 15 minutes


Module 4

Goal of Module 4: Understand the Basics of Programming and how to Convert Psuedocode Into Usable Code

Module 4: Basics in Programming

Kit(s) needed:
Time: 35-45 minutes
Converting Psuedocode: 3 minutes
Comments: 2 minutes
Variables: 10 minutes
Functions: 10 minutes
If Statements: 10 minutes
For Loops: 10 minutes


Module 5

Goal of Module 5: Introduce Students to the Basics of SquareWear

Module 5*: Squarewear basics

Kit(s) needed: Kit 4: Wearable Technology
Time: 45-50 minutes
Introduction to SquareWear: 2 minutes
Setup: 3 minutes
Upload Sample Code: 2 minutes
Clean up the Code: 5 minutes
Write Your Own Code: 10 minutes
Use the Photoresistor: 2 minutes
Use the Temperature Sensor: 3 minutes
Modify Temperature Sensor Code: 10 minutes
Use the Buzzer: 3 minutes
Modify Your Choice of Code: 10 minutes


Module 5**: Squarewear basics

Kit(s) needed: Kit 4: Wearable Technology
Time: 45-50 minutes
Introduction to SquareWear: 2 minutes
Setup: 3 minutes
Upload Sample Code: 2 minutes
Clean up the Code: 5 minutes
Write Your Own Code: 10 minutes
Use the Photoresistor: 2 minutes
Use the Temperature Sensor: 3 minutes
Modify Temperature Sensor Code: 10 minutes
Use the Buzzer: 3 minutes
Modify Your Choice of Code: 10 minutes


Module 6

Goal of Module 6: Review Programming Basics and Learn how to use the Amplifier Mic Sensor

Module 6*: Code Review and LEDs Responding to Sound

Kit(s) needed: Kit 4: Wearable Technology
Time: 30-40 minutes
Recap on Programming: 15 minutes
Amplifier Mic Sensor: 10 minutes
Create Your Own Sketch: 15 minutes

Module 6**: LEDs and NeoPixels Responding to Sound

Kit(s) needed: Kit 4: Wearable Technology
Time: 35-45 minutes
Recap on Programming: 15 minutes
Amplifier Mic Sensor: 10 minutes
Neopixel Hardware: 5 minutes
Locating Neopixel Examples: 2 minutes
Neopixel Software: 3 minutes
Create Your Own Sketch: 10 minutes

Module 7

Goal of Module 7: Learn how to use different sensors

Module 7*: Working with other sensors

Kit(s) needed:Kit 5: Sensors
Time: 30-40 minutes
Vibrating Motor: 10 minutes
Distance Sensor: 10 minutes
Pressure Sensor: 10 minutes

Module 7**: Working with other sensors

Kit(s) needed: Kit 5: Sensors
Time: 35-45 minutes
Vibrating Motor: 5 minutes
Distance Sensor: 5 minutes
Pressure Sensor: 5 minutes
Bend Sensor: 15 minutes
Servos: 15 minutes

Module 8

Goal of Module 8: Practice pitching and designing projects

Module 8: Pitch and Planning

Kit(s) needed:
Time: 30-40 minutes
What is an Elevator Pitch: 10 minutes 
Key Points: 10 minutes
Examples: 5 minutes
Milestones: 5 minutes
Budget: 5 minutes