Vibrating Motor

Vibrating Motor

tilt

Simple Arduino example to buzz every second.


Components 

1 x vibrating mini motor disc
1 x Arduino Uno
1 x breadboard
alligator clips
jumper wires

Setup

forcecircuit

Arduino sketch

Adapted from Adafruit example. 
/*
  Blink
  Turns on an vibrating mini motor disc 
  on for one second, then off for one second, repeatedly.
 
  This example code is in the public domain.
 */
 
// Pin 13 has an mini motor disc connected on most Arduino boards.
// give it a name:
int buzzPin = 13;

// the setup routine runs once when you press reset:
void setup() {                
  // initialize the digital pin as an output.
  pinMode(buzzPin, OUTPUT);     
}

// the loop routine runs over and over again forever:
void loop() {
  digitalWrite(buzzPin, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);               // wait for a second
  digitalWrite(buzzPin, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);               // wait for a second
}